Fieldserver FCI 7100 Series Bedienungsanleitung PDF herunterladen (Seite 7)

FS-8700-112 Gamewell-FCI 7100 Driver Manual Page 7 of 20

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

5 CONFIGURING THE FIELDSERVER AS A GAMEWELL-FCI 7100 SERIES CLIENT

For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The

information that follows describes how to expand upon the factory defaults provided in the configuration files

included with the FieldServer (See “.csv” sample files provided with the FieldServer).

This section documents and describes the parameters necessary for configuring the FieldServer to communicate

with a Gamewell-FCI Series 7100.

5.1 Client Side Connection Parameters

Section Title

Connections

Column Title

Function

Legal Values

Port

Specify which port the device is connected to the

FieldServer

P1-P8, R1-R2

Protocol

Specify protocol used

FCI_7100, FCI_7100_series,

FCI7100

Baud*

Specify baud rate

1200 (Vendor Limitation)

Parity*

Specify parity

None (Vendor Limitation)

Data_Bits*

Specify data bits

8 (Vendor Limitation)

Stop_Bits*

Specify stop bits

1 (Vendor Limitation)

Example

// Client Side Connections

Connections

Port

, Protocol

, Baud

, Parity

, FCI_7100

, 1200

, None

5.2 Client Side Node Parameters

Section Title

Nodes

Column Title

Function

Legal Values

Node_Name

Provide name for node

Up to 32 alphanumeric

characters

Node_ID*

When multiple panels are networked in an FCI

network the Node_ID is the panel number. Set the

Node_ID of the local panel to zero, and create one

Node descriptor for each panel setting the

Node_ID to the panel number.

In networked configurations,

specify whole numbers 0,1,2,3

…

Protocol

Specify protocol used

FCI_7100, FCI_7100_series,

FCI7100

FCI_Reset_Action_Option*

Only required for networked configurations.

Reset_by_any_Node,

Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available

on specific hardware.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Fieldserver FCI 7100 Series Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Fieldserver FCI 7100 Series